歡迎光臨濰坊市正邦重工機械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
熱門關鍵詞Hot Keywords:洗沙機/sand washing machine,洗沙設備/sand washing equipment,廣東洗砂機/Guangdong sand washing machine,洗砂機/sand washing machine
高級搜索:
解決洗石機磨損嚴重的有效措施/Effective measures to solve the serious abrasion of washing machine

來源: 時間:2018-09-21 11:49:29 次數:

洗石機在工作的時候要先進行注水,然后再加入砂石進行加工,這樣反反復復長時間的砂石清洗進程,造成主軸和葉輪的磨損嚴重。When the washing machine is working, water should be injected first, and then sand should be added for processing. In this way, the long-term sand washing process will be repeated, resulting in serious wear of the main shaft and impeller. I

洗石機在工作的時候要行注水,然后再加入砂石進行加工,這樣反反復復長時間的砂石清洗進程,造成主軸和葉輪的磨損嚴重。再加上一些荷載的不斷變化,終導致摩擦條件不穩定從而造成零件磨損。而零件的磨損直接跟潤滑作用有關。因此,在使用洗石機工作過程中用戶必須合理選擇較為適合的潤滑材料以及潤滑系統,保證洗石機在工作過程中零部件能得到充足的潤滑作用??梢杂行Ы档拖词瘷C的摩擦系數。通常情況下,我們采取在摩擦表面建立液體摩擦的方式,這也是有效的措施之一。


其次,洗石機磨損嚴重的原因還有可能是因為滑動軸承受損的問題,主要存在兩種可能:一種是軸承因為承受局部磨損而產生不均勻變形,另一種就是承受相對均勻的磨損終導致軸承和軸頸之間的間隙不斷增大。因為一般情況下軸的耐磨性要比軸承材料高出許多,因此軸承磨損的速度也比較塊,所以操作員在操作過程中要多注意操作的一些細節,這樣才能保障洗石機的正常運行。延伸洗石機的運用壽命。

When the washing machine is working, water should be injected first, and then sand should be added for processing. In this way, the long-term sand washing process will be repeated, resulting in serious wear of the main shaft and impeller. In addition, the constant changes of some loads will eventually lead to the instability of friction conditions and wear of parts. The wear of parts is directly related to lubrication. Therefore, in the process of using the washing machine, the user must reasonably select the appropriate lubricating materials and lubricating system to ensure that the parts of the washing machine can get sufficient lubrication during the working process. It can effectively reduce the friction coefficient of the washing machine. Usually, we take the way of establishing liquid friction on the friction surface, which is also one of the most effective measures.
Secondly, the serious wear of the washing machine may also be due to the damage of the sliding bearing. There are two main possibilities: one is the uneven deformation of the bearing due to bearing local wear, the other is the relatively uniform wear which eventually leads to the increasing gap between the bearing and the journal. Generally, the wear resistance of the shaft is much higher than that of the bearing material, so the speed of bearing wear is also relatively large, so the operator should pay more attention to some details of operation in the operation process, so as to ensure the normal operation of the stone washing machine. Extend the service life of the washing machine.

亚洲男人第一无码AV网站